Nanotechnology for the protecting of marble, granite and porcelain surfaces from staining

Công nghệ nano để bảo vệ các bề mặt đá cẩm thạch, granit và bóng kính khỏi sự nhuốm bẩn .

Staining of porcelain, marble and granite tiles can be disastrous for these valuable surfaces. Microscopic analysis of these surfaces reveals multiple interconnected pores that readily collect stains resulting in loss of shine and natural appearance. SurfaPore T creates an impermeable and invisible shield by blocking even the finest pores of these surfaces.

GENERAL CHARACTERISTICS

SurfaPore T is a water based product. The nano-sized particles, that fit the pores of a polished surface, penetrate and “flood” the pores that can accumulate dirt. These nanoparticles have the ability to self polymerize and create an impermeable grid of inert material. After modification, dirt particles fail to penetrate into the microporosity of the surface (marble, granite or polished tile). Therefore, an important, value-adding objective has been achieved.

APPLICATION SURFACES

Porcelain tiles, granite, polished surfaces

APPLICATION NOTES

The application surface should be dry and clean. Apply SurfaPore T by brush, roller or spraying. No dilution is required. After 15 minutes and before SurfaPore T dries completely, remove any excess and polish, by using a wet cloth and then wipe out with a dry cloth. On sensitive surfaces, reapply within 3 hours. Test results on a small area before full scale application. Maximum effectiveness is achieved 24 hours after application.

Consumption: Estimated consumption rate 14-20 m²/L, strongly dependant on the properties of the surface applied.